ER A4/Passat 1.8t Test Pipe
Click To Enlarge

The factory (OEM) catalystic converter (Cat) is very restrictive on the exhaust flow in the exhaust system. Exhaust gas must pass through tiny "honeycomb" passages in the OEM cat which restrict flow and cause turbulence which in turn hinder performance. By removing the OEM cat with the Evolution Racewerks Test Pipe, power is unleashed!

Key Features:

  • High grade 304 stainless steel material is used throughout our test pipe. Everything from the flanges, o2 sensor bungs and even the included nuts and bolts are full stainless steel
  • 100% TIG welded with stainless steel welding rod
  • Mandrel Bent Piping
  • Mirror polish or brushed finish available
  • 3" Diameter piping to match K03/K04 turbo turbine outlet
  • Smooth transitions to 2.5" to match aftermarket or factory downpipes
  • Welded both inside and outside of the flanges for strength and longevity
  • Includes Downpipe gasket
  • Includes all hardware needed to install
  • Includes all stainless steel hardware, nuts, bolts and washers
  • Limited Lifetime Warranty

The K03/K04 turbine (exhaust) outlet is almost 3" in diameter. That is why the ER test pipe features a 3" design that reduces to 2.5" (to bolt up to OEM and most aftermarket downpipe/exhaust systems). Also, we use a "flare" type reducer to reduce the size to 2.5" instead of the "step" type reducer (the "flare" type cost us more to manufacture though). The advantages of the "flare" reducer is that it has a nice smooth transition which causes less turbulence than the step type reducer, therefore producing more power. Also, having the transition as far as possible to the turbo improves performance as well.

The Evolution Racewerks Test Pipe's 3" to 2.5" design is superior over other test pipes that are 2.5" in diameter from inlet to outlet because the 2.5" test pipes will have a "step" right at the outlet. Since the OEM K03/K04 turbos have a turbine (exhaust) outlet of almost 3", the flange of the 2.5" test pipes will actually make a "step" right at the turbo outlet. This step acts like a wall against exhaust flow and when the exhaust hits it, major exhaust turbulence is created, at the worst spot possible, right at the outlet of the turbo. If you have a 2.5" test pipe, check it out. Look at the inlet flange and you will see a "ring" of carbon deposits on the flange. This is the "step" that the exhaust flow is hitting.

The Evolution Racewerks Test Pipe is completely constructed from quality 304 stainless steel and is polished to a mirror finish. The pipe, flanges, o2 sensor bungs EVERYTHING is 304 stainless steel, even the welding rod we use. The piping is fully mandrel bent. The ER test pipes are 100% TIG welded for quality and strength. The flanges are welded inside and outside to the pipe for added strength and extra longevity.

True to ER standards that our current customers enjoy, EVERYTHING needed for installation is including the downpipe inlet gasket. EVERY bolt, nut and washer that is on the catalystic converter/test pipe is replaced with high quality full stainless steel bolts, nuts, and washers! Yes that's right FULL stainless steel, down to even the hardware. The gaskets and full stainless steel hardware alone is worth $50!

CAUTION: This product is intended for OFF ROAD USE ONLY. Use of this product upon public highways is prohibited.

  • Item #: ER-AU-EXH001P

ER A4/Passat 1.8t Test Pipe

Price: $195.00
Sale Price: $175.00
* Marked fields are required.
Qty: *